Utilize a Pneumatic Forklift
You could normally find pneumatic forklifts in shipping and warehouse operations. Also known as pump trucks or pallet trucks, they are used in order to move supplies and products around on wooden pallets utilizing metal forks that are mounted on a wheeled counterweight. The counterweight has a pump that raises the forks off the ground. A pallet truck is intended to be operated by one individual.
Pallet trucks should be operated with care in order to prevent loss of control while raising heavy loads. Machine must be inspected before operating. Clear the wheels area of any obstructions. Check that the handle can turn smoothly. The pallet should be stacked carefully to guarantee that nothing would fall off during transportation.
On the end of the pallet truck's handle, squeeze the level located on the inside of the metal loop to be able to lower the forks and release the air in the pump. The forks can then be pushed into the slots of the pallet. The forks should be centered to ensure even distribution of the pallet's weight across them. Raise the forks from the ground by pumping the handle of the pneumatic lift until the pallet has cleared the ground completely. Do not raise the pallet very high or the forklift can unbalance.
Pull on the handle and then drag it behind you if you want to move the pallet. It is really dangerous to push the pallet ahead of you because the momentum could cause it to lose control. Take turns slowly and don't try to stop abruptly. Gradually come to a stop, squeeze the lever, and the forks will lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent place.