The type of vehicle normally found within warehouses, factories and various work sites where moving heavy materials from one location to another is required is referred to as a forklift. The mast is the mechanism located on the front of the forklift which hydraulically raises and lowers the load. The "cat" is the area which is protected where the forklift driver sits.
Forklifts are capable of lifting loads between one and five tons in weight. Various kinds could be utilized to lift shipping containers and much heavier loads.
The tires of a forklift should be checked and maintained frequently. The kinds of tires on various forklifts vary according to factors like frequency of use, weight of the loads and ground surfaces. Every operator of a forklift should have access to a forklift jack, tire press and replacement tires.
Tire Maintenance Instructions
Carry out tire inspections regularly. Watch for signs of wear and damage to the tires. If the wear on the tire exceeds 40 percent, it must be replaced.
When buying tires, make certain that you are buying the right kind - pneumatic, polyurethane or solid.
When you need to replace the tires, the forklift jack should be positioned under the tire. You could easily change the tires if you lift the forklift high enough.
In order to remove the damaged tire, pull the tire from the rim utilizing the tire press. Install the new tire and properly secure it. If you are changing more than one tire and you have only one jack, lower the forklift, then reposition the jack at the next tire.
A repair company could offer on-site tire repair. If the tire is too big for both mobile and in-house tire presses, the damaged tire will have to be transported to a shop which has a stationary tire press.